Transform your space in minutes with our easy-to-apply wall stickers. In this step-by-step guide, we’ll walk you through the simple process of applying them like a pro.

To ensure the best results and avoid common mistakes, please follow the instructions below carefully.

Let's get started!

How to apply our wall stickers

1. Prepare the wall

Ensure the surface is clean, dry, smooth, and free from dust, grease, or flaking paint. Newly painted walls should be left to dry for at least 3–4 weeks before applying stickers.

2. Peel gently

Carefully peel the sticker from the backing sheet, avoiding stretching or creasing.

3.  Position & press

Apply to the wall using light pressure with clean, dry hands or a soft cloth to remove air bubbles.

5. Test first

Always test a small section before full application, especially on delicate surfaces.

Removal Guidelines

1. Peel slowly: Start from one corner and gently peel the sticker back on itself slowly and evenly.
   
   
2. Use warmth if needed: If the sticker resists or the paint is delicate, use a hairdryer on low heat to soften the adhesive as you peel.
   
   
3. Check for residue after removal: Most of the time, none remains. If needed, use a cloth soaked in warm, soapy water (a little mild dish soap works well) to gently wipe away any sticky areas.
   
   

! Please Note

Due to the wide variety of wall paints and finishes, we cannot guarantee damage-free removal in all situations. For best results, follow the above steps carefully and avoid use on fragile, peeling, or poorly prepared surfaces.